$199.00 $220.00 You save: 9% ($21.00)
TOPDON BT300P Battery Tester for 12-24V with Printer
BATTERY TEST: Display SOH (State of Health), SOC (State of Charge), Voltage, Current, Rating, and the readable analysis results on the backlight LCD screen and smart 3 LED indicators;
CRANKING TEST: Analyze the actual cranking voltage and the cranking time
CHARGING TEST: Test different parts of the charging system, including generator, rectifier, rectifier diode, and so on for a reliable charging volt value.
Functions: Cranking Test, Charging Test, Review Data, Print Data, Export Data to Computer.
The Topdon BT300p can help you diagnose faults with direct test results: “GOOD, BAD, REPLACE, or RECHARGE”.
Simply connect the tester to check battery health condition: CCA value/rating, voltage, internal resistance, state of health (SOH), and state of charge (SOC).
State of health (SoH) is a figure of merit of the condition of a battery (or a cell, or a battery pack), compared to its ideal conditions.
State of charge (SoC) is the level of charge of an electric battery relative to its capacity, SoC is normally used when discussing the current state of a battery in use.
Set this battery tester to cranking test mode and then start the vehicle.
The result will tell if your 12V & 24V electrical system can generate enough power to start the engine.
Loaded Voltage means the voltage measured when turning on on-board electrical appliances, such as headlights.
Unloaded Voltage means the voltage measured when turning off all the on-board electrical appliances.
Use the Topdon BT300P to routinely check the 12V or 24V charging system of the vehicle, determine alternator health, and troubleshoot charging issues.
User-Oriented Battery Load Tester: Its 2.4” color screen shows clear readings in any lighting condition. Intuitively placed buttons allow you to toggle menus with ease. With the built-in thermal printer, you won’t have to worry about running out of ink. No ribbons, cartridges, or other supplies are needed for its use. Standard thermal paper is the only refillable supply required to print your test results.
Measure Range: 3AH-250AH, 100-1700CCA
*Tests battery rating systems - CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.
*Additional diode test
*Compatible with Lead-Acid, regular flooded, AGM flat plate, AGM spiral, gel and deep cycle batteries.
*Quick starter analysis without disabling the ignition.
*Does not emit light, heat or spark, or discharge battery-keeps operation safe for all levels of users.
*System time adjustment.
*Built-in printer for direct data printing.
Packing List
1* battery tester with printer
2*printing paper
1* User Manual
Multiple Languages: English, Russian, Spanish, French, Italian, German
**NOTE: Print function ONLY works on 12-16V cars.
Fast and Free Shipping
After Sales technical support
The product will come with a one-year warranty
30-day money-back guarantee - we guarantee you'll love it or you'll get your money back