Thinkcar AC100 V3.0 Automotive A/C Service Station | R134a & R1234yf

The Thinkcar AC100 V3.0 is a fully automatic A/C service station that handles refrigerant recovery, recycling, vacuuming and recharge in a single unit. It supports both R134a and R1234yf refrigerants, it covers everything from older passenger cars through to current new cars.

The machine runs through the service cycle automatically once you set the parameters. It pulls the old refrigerant out, evacuates the system, then recharges to the correct spec. The built-in vehicle database matches refrigerant type and charge weight to the specific vehicle, so there's no looking up spec sheets mid-job.

If anything goes wrong during the process, the machine stops and alerts you. It does not just keep running.

Key Features

• Fully automatic operation: recovery, vacuum, recharge in one cycle
• Supports R134a and R1234yf refrigerants
• Built-in vehicle database for refrigerant type and charge weight lookup
• 7-inch LCD display with LED-backlit transparent viewing window
• Automatic fault detection: stops and alarms if an issue occurs during servicing
• Built-in micro-printer: prints job reports including total hours and materials used
• Pre-set parameter configuration: set it up and let it run

Workshop Benefits

A/C servicing is a high-volume, repeatable job. The AC100 takes most of the manual work out of the process. You set the parameters, connect it up, and the machine handles the rest. The built-in database means your staff aren't guessing charge weights, and the printer gives you a job record on the spot without having to write anything down.

Works on all combustion engine vehicles. Dual refrigerant support means you're not running two machines for older R134a and newer R1234yf vehicles.

Compliance Note

In Australia, handling automotive refrigerants requires a current ARCtick licence issued by the Australian Refrigeration Council. This machine is for use by licensed technicians only.

Specifications